SYNCROWN PGO synthetic gear oils are polyglycol-based products for use in enclosed gears, bearings, and compressors where conditions demand the unique properties of these fluids. Better wear protection, thermal and oxidation stability, and reduced sludge and deposit formation insure enhanced performance when compared to petroleum-based lubricants.

SYNCROWN PGO synthetic oils were built specifically for use in enclosed gears, bearings, and compressors where conditions demand the unique properties of these fluids.

PDS

SYNCROWN SHO Series synthetic gear and bearing oils are formulated using synthesized hydrocarbon fluid and select additives to enhance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming. These synthesized hydrocarbon fluids (SHF) provide significantly better thermal and oxidation stability, as well as increased protection against the loss of viscosity than do conventional good quality mineral oils. The high inherent viscosity index of these oils provides higher viscosities and therefore greater film thickness at higher temperatures and lower viscosities for easy start-up and minimal internal friction at lower temperatures. The low coefficient of friction of the SYNCROWN SHO Series lubricants substantially reduces power consumption and gearbox operating temperature, further prolonging the useable life of this lubricant.

SYNCROWN SHO Series lubricants are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or roller element bearings. They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs. SYNCROWN SHO are also recommended for use in applications where the corrosion of yellow metals is a concern as these lubricants do not contain additives which tend to attack metals such as brass, bronze or copper. The SYNCROWN SHO lubricants are compatible with essentially all seal materials, plastics and paint, including nitrile Buna N, neoprene, Viton®, teflon, polyethylene, polyurethane ether, fluorocarbon, polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer

PDS

Most industries in today’s world are shifting their focustoward efficiency improvements by putting an emphasis onreducing energy requirements for equipment used in plantoperations and for vehicular equipment. Technological advances in lubricants have helped reduce the input powerused to operate equipment by reducing friction. Brautek has developed synthetic gear oils which will not only reducefrictional drag, but will also protect gears against failures associated with heavy loading. SYNCROWN HEAVY DUTY Series meet the requirements of the API designations GL-5, GL-4 & MT-1, the MIL-L-2105E specification, SAE J2360 and the Mack GO-J specification. SYNCROWN HEAVY DUTY Series lubricants are designed to meet the requirements of Eaton and Rockwell differentials.

PDS

SynCrown HD is a synthetic gear lubricant, specially designed for heavy duty automotors gearboxes, used in severe conditions of operation and where an EP lubricant is not required. SynCrown HD is formulated using synthesized hydrocarbon fluid and exclusive additives to enhance oxidation resistance and provide maximum protection against wear, rust and corrosion, resulting in extended drain.

PDS

GEARMAX EP Series is a blend with the highest quality sinthetic and mineral base oils and additives to provide extreme pressure protection, resistance to foam and excellent rust, corrosion and oxidation protection. Non-corrosive to brass, bronze, steel and other copper alloys. GEARMAX EP Series can be used in chain drives, sprockets, plain and anti-friction bearings, slide guides and flexible couplings. It can be used in manual transmissions, gear canes and worm gears on mobile contractor type equipment. Provides excellent shock loading properties. GEARMAX EP Series is designed to whithstand heavy loads. GEARMAX EP Series oils are formulated to meet the stress by providing extra protection for gears, bearings and seals.

PDS

GEARMAX TACKFENDER EP is strengthened with a tackifire agent that protects and ensures adhesion properties. It can be used in chain drives, sprockets, plain and anti-friction bearings, slide guides and flexible couplings. It can be used in manual transmissions, gear canes and worm gears on mobile contractor type equipment. GEARMAX TACKFENDER EP Provides excellent shock loading properties. Series is designed to whithstand heavy loads.

PDS

GEARMAX FG Series gear oils are specially formulated for gear systems operating in the food service and packaging industries. GEARMAX FG Series lubricants are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). GEARMAX FG lubricants are fortified with oxidation inhibitors as well as anti-wear/EP additives to pass the highest stages of the FZG test.

GEARMAX FG Series gear oils are ideal for the lubrication of production equipment in beverage canning, bottling operations, meat and poultry processing, dairy operations, fruit and vegetable processing, bakeries, and pharmaceutical plants.

PDS

SYNCROWN SHO FG (food grade) are fully synthetic lubricants, are H1 and comply fully with the requirements of NSF for lubricants with possible incidental food contact. SYNCROWN SHO FG lubricants are fortified with oxidation inhibitors as well as anti-wear/EP additives to pass the highest stages of the FZG test. They are extended life lubricants and have the same excellent material compatibility as the SYNCROWN SHO Series gear oils.

SYNCROWN SHO FG (food grade)series gear oils are formulated specially for gear systems operating in the food service and packaging industry.

PDS

SYNCROWN PGO FG Series synthetic oils are polyglycol-based products for use in enclosed gear, bearings, and compressors where conditions demand the unique properties of these fluids. Use these lubricants where there is the potential for incidental contact with food or food packaging. Better wear protection, thermal and oxidation stability and reduced sludge and deposit formation insure enhanced performance when compared with petroleum-based lubricants. These lubricants are NSF registered and meet USDA (H1) guidelines (lubricants with incidental food contact) for use in food plants.

SYNCROWN PGO FG Series are built specifically for use in enclosed gear, bearings, and compressors in situations where there is the potential for incidental contact with food or food packaging. These lubricants are incompatible with petroleum oils. Care should be taken to prevent the two types of fluids from being mixed.

PDS